Fendertex fenders utilize a patented, single-sleeve knitted polyester textile, engineered to deliver exceptional strength and durability.
Trusted Protection Since 2014
Yachts Protected
General Information
MATERIALS
All Fendertex fenders and covers are made from a knitted polyester textile. The bladder is made from polyurethane.
FENDERTEX COVERS
Fendertex Fenders do not need a cover to function properly, however it is highly recommended to add a Fendertex Cover when used on workboats, or fending off an abrasive concrete docks and vessels weighing 2,000 tons or more. Long Side Covers are required to hang Fendertex Fenders horizontally. The retention strap goes around the fender collar.
TEMPERATURE FLUCTUATIONS
Fendertex Fenders will not release air in temperature fluctuations like PVC fenders. The top and bottom portions will expand approximately 7% and the middle portion will not expand allowing the mid section (protective contact area) to maintain its shape during temperature changes. This helps eliminate the need of reinflating the Fendertex Fenders during temperature fluctuations.
INFLATION ADAPTER
To inflate the Fendertex Fenders, use the standard Halkey Roberts style adapter fitted on most pumps and supplied with each order. Each adapter from Fendertex has three spacers, colored yellow, black, and green. All Fendertex models will use the black and yellow spacers only. You do not need the green spacer for Fendertex Inflation. The small screw in the center of the inflation adapter must be tightened all the way down before use.
Integrated Strength
The outer textile layer itself acts as the primary structural component, eliminating the need for additional reinforcement layers.
Compression Resistance
Designed to withstand compression loads up to 20,000 kg, ensuring reliable protection during docking and mooring.
C62 | 2.000KG
C73 | 3.000KG
C84 | 4.700KG
C104 | 6.000KG
C124 | 7.800KG
C145 | 9.000KG
C175 | 12.000KG
C207 | 16.000KG
C245 | 20.000KG
UV and Abrasion Resistance
Mass-dyed polyester resists UV degradation and abrasion, maintaining appearance and functionality over time.
Compact Storage
When deflated, Fendertex fenders occupy up to 95% less space compared to traditional PVC fenders.
Efficient Stowage
Their flexible design allows for easy rolling and storage in tight spaces, ideal for yachts with limited storage capacity.
Quick Deployment
Despite their compact size, Fendertex fenders can be inflated swiftly, ensuring readiness when needed.
Durable Construction
The robust material ensures that the fender maintains its integrity and performance even after repeated deflation and inflation cycles.
Reduced Weight
Fendertex fenders are designed with the crew in mind — lightweight, easy to handle, and flexible to adapt to different conditions.
Optional Weighting
For extreme weather or rough docking conditions, the fender bladder can be filled with clean water to add temporary weight. Water can be easily drained when not needed.
User-Friendly Design
Quick deployment, retrieval, and long-lasting performance make fender management safe and efficient.
Anatomy of the Fender
- A technical textile — in Polyester with high mechanical resistance and abrasion. Do not load in salt thus avoiding micro scratches on the hull. Easy cleaning with water or in washing machine. avoid depolymerization with prolonged contact on the shell.
- Long side ring
- Specific inner tube — with high elasticity. Possibility of adding water for ballasting.
- Technical textile — with low elasticity at the ends to compensate the increase in air volume caused by high temperatures and to maintain a constant pressure of about 350 mbar (5.1 psi).
- Retention strap — to prevent deformation of the collar during compression.
- Inflatable suspension collar — maximum capacity at vertical tension : 1.5 Ton.
- Suspension strap — sewn into a cross for added strength.
- Stainless steel rings 316